Hydropower is an important source of energy in Sweden and accounts for about 46 % of the total energy production. Sweden has about 1 200 hydropower plants and with the intention of raising the pressure head of the water and to store water, dams are built by the power plants. The storage reservoirs make it possible to adjust the energy production by demand and season. Dams in connection to the reservoirs are subjected to additional loading during periods of high floods or when an icecap in the winter is formed on the reservoirs. In order to maintain the dam safety, the power companies in Sweden are working with guidelines for dam safety from RIDAS.

This thesis is written on behalf of Skanska, Väg- och Anläggning Stockholm Mälardalen, vid Nya Karolinska Sjukhuset i Solna, NKS. The report has resulted in recommendations for the method of soil stabilizations of soil nailing, excavation of slope and fiber reinforced shotcrete, which is the most suitable method from a safety and a cost point at the NKS.The aim of this thesis was to investigate whether fiber reinforced shotcrete increases slope stability, with the focus being on the total stability. The main goal was to investigate which method of soil stabilization is the most suitable for the slopes that are analyzed in this report. Through studying literature, the authors have gained an understanding about the theoretical background for the given problem. Through calculations and analyses of the slopes, safety factors have been acquired.

A detailed dam safety evaluation (in Sweden called FDU) was performed in 2009 by WSP where stability control was performed for Långströmmen power plant with associated spillways. This evaluation concluded that stability could not be ensured, and risk of sliding occurred. The evaluation is based entirely on the recommendations outlined in RIDAS, the power companies guidelines for dam safety, and it is clear that extensive renovations are necessary to stabilize the dam.In this work, the stability will also be checked with guidance through new proposals on guidelines for concrete dams sliding stability, ELFORSK?s report 08:59. This report considered the guidelines in RIDAS as oversimplified, both from an international perspective, but also with regard to the current state of knowledge regarding dam safety.

As a consequence of a turbulent financial market with recurring recessions, the Basel regime was developed, an institutional change with the purpose to create enhanced financial stability through increased capital requirements and increased scrutiny of internal procedures. The Basel regime is an often recurring element in social debates where various aspects are discussed, one of which is whether it maintains its purpose to secure financial stability or whether it is cost effective, and if not, who gets affected by these potential costs.The majority of previously conducted research within this area agrees with the opinion that changes in the regulatory framework within the financial markets, such as the Basel regime, has led to reduced risk of bankruptcy for the banks which has contributed to increased global financial stability. However, research illustrates that these types of changes in the regulatory framework impose a financial burden leading to contradictions in the division of these costs between costumers and shareholders. This dissertation has been conducted from a shareholders perspective, out of which the study ?s three hypothesis has been created from.The data in this study is built upon the stock price from the three largest available banks? shares (based on total assets), in the 26 countries which are represented in the Basel committee from (2007) to (2013).

Since 2003 Saudi Arabia is under attack from domestic Al Qaida-cells which, by random shootings of westerners and bombings of compounds and official state buildings, is trying to challenge the stability of the royal regime. According to Al Qaida, the Royal family is attacked because of their friendly relations to the US and for not implementing Islam in the Saudi society as profound as they ought to. Political analyst finds it obvious that the Islamic Al Qaida-cells by terrorism is trying to erode the stability in the kingdom.An important foundation for stability for any government is legitimacy. The aim of this thesis is to examine the royal legitimacy strategy in the state bureaucracy of Saudi Arabia. The question at issue is: how has the royal family constructed the civil, military and religious bureaucracies to maintain and promote stability and legitimacy?The thesis focuses on the on three different units within these three bureaucracies and it surveys the way they are staffed and organized to strengthen and maintain legitimacy for the royal family.

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and calculation software Xpower.Then the possible differences between calculations of power networks using load curves incombination with a yearly estimate of consumption and calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that calculations using hourlymeasured values would be unnecessary. I believe that in a near future calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

In recent years, global organizations safeguarding financial stability has started to track commercial property markets. One of the reasons for this refers to the fact that commercial property constitutes a large share of bank lending. Simultaneously, bank exposures to commercial property are extensive and risky since collateral values are strongly correlated to borrowers cash flows. Since banks are viewed to play a key role for financial stability, studying the relationship is well motivated. To better understand how commercial property markets interact with financial stability, this paper develops an econometric model for studying the commercial rental market.

This paper is about the extent to which simplified penetration calculations ofsmall-caliber projectiles is a useful tool for assessing the physical protectioncapability. The work should be seen as an attempt to create an accessible tool inthe form of a simplified equation that allows for a better and safer use of thenaval vessels. The tool will also be used at different levels so that decisions andinstructions could be clearer.Performed calculations show a very limited capacity of a ship's basic design interms of physical protection against the use of small-caliber projectiles.How do we know that the calculations correct? By verifying the calculations withpractical shooting tests, a substantial condition to answer the question will becreated. To shoot against a material with two different thicknesses estimated toproduce perforation and non-perforation is a good approximation of the equationusability in the context..

This master thesis has been performed at Solvina in Gothenburg for Skellefteå Kraftand Vattenfall Eldistribution. The aim of it is to investigate the consequences of theinstallation of a wind power plant on the mountain Uljabuouda in the vicinity ofArjeplog. Especially the impacts on voltage and transient stability are examined.Furthermore, the amount of extra strain on the voltage regulation equipment and theneeds for increased regulation capabilities are looked into.The wind power plant is planned to be built by Skellefteå Kraft and connected to a130 kV grid owned by Vattenfall Eldistribution. The work comprehends the followingmain parts:- Theoretical studies aimed at wind turbines and power system stability issues.- Modelling of the type of wind turbines assumed to be built on Uljabuouda.- Simulations of different operation cases and analysis of the simulation results.The results from the simulations show that, as far as voltage stability and extraworkload on tap-changers are concerned, the wind power plant does not, in anysignificant manner, worsen the present conditions. The problem of overloading theline between Arvidsjaur and Vargfors is also minor.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.